This post may be early. Downloaded Win 10 20H2 iso, installed it on a USB 2 key and as soon as it loads up the installation files, it's looking for a missing driver (media). Switching USB sockets make no difference (and older solution). 'When Windows complains about a missing required CD/DVD driver, click cancel, then the X, so you're back at the 'INSTALL NOW' screen. At this stage, remove your USB stick, then plug it into another USB port. Click Install Now again. It will redetect the USB stick and install normally.' G73JH-A1 WIndows 10 Clean install - A Media driver your computer needs is missing Hello there. I've run into an odd problem when trying to clean install Windows 10 64-Bit on my G73JH-A1 using a USB Flash Drive and hopefully someone can point me in the right direction. G73JH-A1 WIndows 10 Clean install - A Media driver your computer needs is missing. I've run into an odd problem when trying to clean install Windows 10 64-Bit on my G73JH-A1 using a USB Flash Drive and hopefully someone can point me in the right direction. I can boot the G73JH-A1 from my USB Flash Drive that was created by the Media Creation tool located at: https://www.microsoft.com/en-us/soft.load/windows10. GO TO ANOTHER PC and make your download media on a USB stick that is at least 8GB using this link:. Then, again assuming that you have the bios settings correct (i.e. UEFI enabled), boot the USB stick and install Windows 10. Now, whether you are successful or not, STOP.

I am trying to create a Windows 10 installation media for my Dell XPS 9550 PC. I prefer to install clean windows 10 installation than Dell’s windows 10 images. Though I used my dell laptop, most of the steps are common for all drivers.

Configure outlook for mac 2011 office 365. Configuring MS Outlook 2011 for Mac for Use with Office 365. Here below are listed the steps to take in order to configure MS Outlook 2011 for Mac for use with 365 in Exchange mode. The guide has been tested working on Mac OS X 10.6 (Snow Leopard) and 10.7 (Lion). Screenshots are taken from Lion thus may slightly differ on other versions of. May 30, 2020 When Autodiscover is set up correctly, you can automatically set up Outlook for Mac 2011 to access your account by using only your email address and password. For info about how to create the Autodiscover CNAME record, see Use a CNAME Record to Enable Outlook to Connect. Note DNS record changes can take up to 72 hours to populate through the.

1. Get a clean Windows 10 media (This step can be ignored if you already have windows 10 install USB)
   1. Download and run media creation tool from below link
   2. Follow the images to create windows installation media

      Get a clean Windows 10 media (This step can be ignored if you already have windows 10 install USB)

2. Download the drivers that you are planned to add. In my case I am adding wifi driver to my installation media. Download and extract contents from manufacture sites, my case it looks like below
3. Convert install.esd to install.wim and add drivers to install.wim file
   1. Run Command Prompt as administrator
   2. excute following commands
      1. dism /Get-Wiminfo /Wimfile:f:/sources/install.esd (f: is my windows media usb drive)
      2. If the above command is okay, you will see something like this
      3. dism /export-image /SourceImageFile:f:/sources/install.esd /SourceIndex:1 /DestinationImageFile:install.wim /Compress:max /CheckIntegrity
      4. In the above command, my windows version is pro so I chose “1” for SourceIndex (Refer step 1 output to chose the right index). Above command take few minutes to create wim file, if successful, it screen looks like below
      5. Dism /mount-wim /wimfile:install.wim /index:1 /mountdir:e:mount (where e:mount is a empty folder in my local drive)
      6. dism /image:'e:mount' /add-driver /driver:'E:driverswifiDriversWinThreshWLx64bcmwdidhdpcie.inf'
      7. dism /unmount-wim /Mountdir:e:mount /commit
4. Delete install.esd file from “sources” folder in installation media and replace that with install.wim file.
5. Done. Now we are good to proceed with installation

Warning : Make sure you have another backup disk/media in case if installation fails

Hey guys, just to clarify, I am 100% up to date on my Virtualbox install, in fact it updated less than an hour ago.
Anyways, when I attempt to install Windows 10 64-bit, it fails before the install begins as far as I can tell. It prompts me for a 'Missing Media Driver' that my PC needs, but obviously I don't have it.
I find it hard to believe that this is a corrupt iso file, since I downloaded it from the official source.. and then redownloaded it to be absolutely sure that it wasn't corrupt. Obviously, it could be that since a second download doesn't necessarily mean it isn't corrupt twice, but my internet is very slow and it can take up to 8 hours to finish the download, so I want to minimize the number of downloads I do.
Does anyone know what could be happening here?

Install Missing Drivers Free

What Is A Media Driver

Edit: I saw the other post on this board about this, but I don't think that my download is bad, but I also couldn't find a hash to test against, so I can't 100% verify it.